Crankshaft Main Bearing Set β Standard Size
Restore smooth bottom-end performance with this OEM-grade standard main bearing set for Suzuki engines. Designed to hold precise oil clearance, it stabilizes the crank, cuts friction, and brings back quiet, confident starts. Ideal for rebuilds, oil-pressure issues, or light knock at warm idle.
Why your engine needs it
These shells carry combustion loads and keep the crankshaft perfectly centered. Over miles, the surface wears, clearance grows, oil pressure drops, and heat rises. Fresh bearings return factory spec, protect journals, and keep the oil film stable during daily driving or towing.
How it works βοΈ
Each half-shell seats in the block and cap, forming a round journal. Pressurized oil builds a hydrodynamic film so the crank rides on oil, not metal. The standard size fits crankpins that measure within factory limitsβno grinding needed when journals are in spec.
If worn or damaged β
Symptoms include low-end knock, glitter in oil, hot-idle pressure warning, and harsher vibration. Ignoring it can spin a bearing, seize the crank, bend rods, and scrap the block. Replace early to protect the short block and keep repair costs down.
Tech notes
Clean saddles, match caps, align tangs, and lube on install. Torque mains in sequence and verify clearance with plastigage (typ. 0.0015β0.0025 in). Check thrust endplay, prime the oiling system, and change oil/filter after break-in.
Compatibility
- Grand Vitara
- Sx4/S-Cross
- Aerio
- Escudo
- Sx4
