MD195805 RING SET,PISTON
Images
Compatibility
Mitsubishi MD195805
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| N30,40# | Japan | N43W | 03.1991 | 09.1997 | 2000/4WD | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| PA-PF# | Japan | PA3V | 03.1994 | 12.2006 | 2000/2WD/SHORT(VAN)<95M-> | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| P0-P4# | Japan | P07V | 04.1986 | 06.1999 | 2000/2WD(VAN)<95M-> | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| P0-P2# | Japan | P13T | 03.1994 | 06.1999 | 2000/2WD/LONG(TRUCK)<95M-> | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| EA1-7A | General (EXPORT) | EA2A | 10.1996 | 03.2006 | 2000(4CYL)/2WD - GLXI/GLS(MPI),4FA/T NEWZEALAND | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| EA2,5W | General (EXPORT) | EA2W | 12.1998 | 09.2002 | 2000(4CYL)/2WD - GLS(MPI),4FA/T NEWZEALAND | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Plant | Diagram |
|---|---|---|---|---|---|---|---|
| K60,70# | General (EXPORT) | K62T | 01.1996 | 12.2007 | 2000/2WD(TRUCK) - L-LINE(DOUBLE CAB,MPI),5FM/T GCC | MMTH | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| P0-P4# | General (EXPORT) | P03W | 09.1986 | 12.2013 | 2000/2WD(WAGON)<87M-> | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Plant | Diagram |
|---|---|---|---|---|---|---|---|
| PA,PB# | Australia | PA3V | 06.1994 | 11.2005 | 2000/2WD/SHORT(VAN)<95M-> | MMAL | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| N10,20# | Japan | N23W | 01.1991 | 03.1997 | 2000/4WD | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| PA-PD# | General (EXPORT) | PA3W | 06.1994 | 06.2005 | 2000/2WD/SHORT(WAGON)<95M-> - GLX(MPI),5CM/T LHD | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| N30,40# | General (EXPORT) | N33W | 05.1991 | 11.2000 | 2000/2WD - GLXI,4FA/T HONGKONG | View |
Information
Engine Piston Ring Set for Mitsubishi
This piston ring set is a small but critical engine part that keeps your combustion strong and your oil where it belongs ?. It is needed to seal the gap between the piston and cylinder wall, so the engine can build proper compression and run efficiently.
How This Part Works
Each ring sits in a groove on the piston and presses lightly against the cylinder wall. The compression rings hold combustion pressure inside the chamber, while the oil control ring scrapes extra oil back down to the sump. This helps deliver steady power, cleaner burning, and stable engine temperature.
What Happens If the Rings Are Worn or Broken
When rings fail, the engine may lose compression and allow blow-by gases into the crankcase. Oil can slip into the combustion chamber, causing smoke and heavy consumption. You may notice weak acceleration, hard starting, rough idle, and higher fuel use. Ignoring it can lead to cylinder scoring and costly overhaul ?.
Common Signs You Need Replacement
- Blue exhaust smoke
- Low compression / misfire under load
- High oil consumption
- Loss of power and poor fuel economy
Compatibility
- L300