• Products
  • MB435457 Mitsubishi SWITCH,STOP LAMP

MB435457 Mitsubishi SWITCH,STOP LAMP, Price: 8.13$, Weight: 0.05kg

    • Make Number Name Availability Weight, kg Ship in, Days Price

    Mitsubishi

    MB435457

    SWITCH,STOP LAMP

    		 100

    0.05

    15-20

    8.13$
     

    Originals

    Make Number Name Availability Weight, kg Processing, days Price  
    Mitsubishi
    MB435457 
    SWITCH,STOP LAMP
    		0
    0.058
    -
    9.87$
    		 Not Available

    Substitutions

    Make Number Name Availability Weight, kg Processing, days Price  
    Mitsubishi
    MR122560 
    SWITCH,STOP LAMP
    		0
    0.035
    -
    23.85$
    		 Not Available
    Mitsubishi
    MR122560 
    SWITCH,STOP LAMP
    		0
    0.035
    -
    18.41$
    		 Not Available
    Mitsubishi
    MB229024 
    SWITCH,STOP LAMP
    		0
    0.035
    -
    13.34$
    		 Not Available
    Mitsubishi
    MB229024 
    SWITCH,STOP LAMP
    		0
    0.035
    -
    12.62$
    		 Not Available

    Brake Light Pedal Switch – Safety Signal Controller

    This small switch sits on the brake pedal bracket and tells the rear lamps when to light up. You need it to warn drivers behind you the moment you touch the pedal. Without a healthy switch, your stop lamps won’t work right, which is a major safety risk and can fail inspections.

    How it works

    A spring-loaded plunger rests against the pedal arm. When your foot presses the pedal, the plunger releases and closes an electrical circuit, sending power to the brake bulbs. Inside are copper contacts designed for thousands of on/off cycles. Many units are adjustable so the lights trigger at the correct pedal point.

    What happens if it fails

    • No brake lights at all ➜ high crash risk
    • Lights stuck on ➜ battery drain, bulb burnout
    • Intermittent lights ➜ random warning behavior

    Typical signs include delayed or no illumination, lights staying on after parking, or a soft “click” missing at pedal movement. Replacement is simple: disconnect battery, unplug connector, unscrew old switch, set the new one with a thin gap to the pedal pad, tighten, plug in, and test. Keep threads clean and do not over-tighten. ✅

    Compatibility

    • Starion
    • Galant