MB422186 Mitsubishi HOLDER,F/DR WINDOW GLASS, Price: 13.82$, Weight: 0.2kg
| Make | Number | Name | Availability | Weight, kg | Ship in, Days | Price |
|---|---|---|---|---|---|---|
Mitsubishi |
MB422186 |
HOLDER,F/DR WINDOW GLASS |
5 |
0.2 |
15-20 |
13.82$ |
Originals
| Make | Number | Name | Availability | Weight, kg | Processing, days | Price | |
|---|---|---|---|---|---|---|---|
| Mitsubishi |
HOLDER,F/DR WINDOW GLASS
|
5 |
0.23
|
2-3
|
13.81$
|
Compatibility
| Market | Model Year From | Model Year To | Plant | Diagram |
|---|---|---|---|---|
| Australia | 12.1997 | 12.2005 | MMAL | View |
| Market | Model Year From | Model Year To | Diagram |
|---|---|---|---|
| General (BRAZIL) | 06.1996 | 03.2001 | View |
| Market | Model Year From | Model Year To | Diagram |
|---|---|---|---|
| General (MEXICO) | 12.2002 | 09.2007 | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Diagram |
|---|---|---|---|---|---|---|
| K80,90# | General (EXPORT) | K97W | 06.1997 | 03.2011 | 2800DIESEL/4WD | View |
| Market | Model Year From | Model Year To | Diagram |
|---|---|---|---|
| General (CHINA) | 10.2002 | 04.2003 | View |
| Market | Model Year From | Model Year To | Diagram |
|---|---|---|---|
| Europe (EUROPE) | 08.1998 | 02.2009 | View |
| Market | Model Year From | Model Year To | Plant | Diagram |
|---|---|---|---|---|
| Japan | 12.1996 | 04.1999 | MMTH | View |
| Frame | Market | Model | Model Year From | Model Year To | Modification | Plant | Diagram |
|---|---|---|---|---|---|---|---|
| K50W | General | K57W | 09.2001 | 05.2005 | 2800DIESEL(PPV) | MMTH | View |
Front Door Window Glass Holder for Smooth Lift
This bracket secures the front door glass to the regulator, keeping the pane straight, quiet, and stable. It grips the lower edge of the glass with a lined clamp, spreads load along the edge, and guides the glass through its channel. The result is clean up/down travel, less rattle, and longer regulator life.
Why this part is needed
Without a solid glass mount, the panel tilts, scratches tint, and can drop into the door. A fresh holder restores alignment, seals better against weatherstrips, and protects the motor and cables from overload.
How it works ✅
A stamped steel body with a rubber buffer clamps the glass. It attaches to the regulator slider; when you press the switch or move the handle, the regulator lifts the holder, carrying the glass straight in its guide rails.
If it’s worn or broken ⚠️
Expect slow or jerky travel, rattles on bumps, glass stuck half-open, water leaks, blown fuses or a strained motor, and in worst cases the pane dropping inside the door.
Install tips
Clean the glass edge, seat fully, align to factory marks, tighten evenly, and lightly grease the guides. Relearn auto-up after battery disconnect.
Compatibility
- L200
- Strada G-Wagon
- Montero Sport
- Pajero Sport
- Nativa
- Challenger
- Strada
- Pajero/Montero Sport