8713860280 Toyota RESISTOR, BLOWER, Price: 21.19$, Weight: 0.11kg


Make Number Name Availability Weight, kg Ship in, Days Price

Toyota

8713860280

RESISTOR, BLOWER

10

0.11

 Dispatch 24h

21.19$

 

Originals

Make Number Name Availability Weight, kg Processing, days Price  
Toyota
8713860280 
RESISTOR, BLOWER
10
0.127
2-3
17.66$
 

Compatibility

DescriptionModelOptionsProd PeriodDiagram
GSJ15GSJ15L-GKFSKYATM,MTM: MANUAL TRANSMISSION; Driver's Position: LEFT-HAND DRIVE VEHICLES; Engine: (1GRFE) 4000CC 24-VALVE DOHC EFI; Destination: GENERAL COUNTRIES07.2007 - 12.2017 View
DescriptionModelOptionsProd PeriodDiagram
GRJ12#,KDJ120,KZJ120,LJ12#,RZJ12#,TRJ12#TRJ125L-GJPEKVATM,MTM: AUTOMATIC TRANSMISSION; NO. Of Doors: 3-DOOR; Driver's Position: LEFT-HAND DRIVE VEHICLES; Grade: GX TYPE; Gear Shift Type: ATM, 4-SPEED FLOOR SHIFT; Engine: (2TRFE) 2700CC 16-VALVE DOHC EFI; Destination: GULF CORPORATION COUNCIL08.2004 - 08.2009 View

Blower Motor Speed Resistor for HVAC Control ๏ธ

This small but critical unit manages the cabin fan speeds for your heater and A/C. It lets you select low, medium, and high airflow, keeping comfort, demisting, and energy use in balance. Without a healthy resistor, you lose fine speed control, which can mean noisy airflow or weak defogging on cold or wet days โ„๏ธ.

How It Works โš™๏ธ

The resistor pack uses calibrated coils and a thermal fuse to drop voltage to the blower motor. Lower speeds route current through higher resistance; high speed bypasses most resistance. Itโ€™s mounted in the duct near the fan so passing air cools the resistor body and prevents overheating.

What Happens If It Fails ๏ธ

Common signs include only โ€œHIGHโ€ speed working, dead lower speeds, intermittent fan, or a burnt-plastic smell. A blown thermal fuse can stop the blower entirely. Failure risks poor windshield clearing, weak cooling/heating at idle, and extra load on the fan switch. Inspect the connector for heat damage or corrosion.

Tech Tips for Replacement

Disconnect battery, access the blower housing (glovebox/footwell), remove two screws, swap the unit, and seat its seal. Check the harness; clean pins and apply dielectric grease. Ensure the cabin filter is clean so airflow cools the resistor properly.

Compatibility

  • Fj Cruiser
  • Land Cruiser Prado