4881853080 Toyota BUSH, STABILIZER, REAR, Price: 24.55$, Weight: 0.131kg
| Make | Number | Name | Availability | Weight, kg | Ship in, Days | Price |
|---|---|---|---|---|---|---|
Toyota |
4881853080 |
BUSH, STABILIZER, REAR |
5 |
0.131 |
2-3 |
24.55$ |
Originals
| Make | Number | Name | Availability | Weight, kg | Processing, days | Price | |
|---|---|---|---|---|---|---|---|
| Toyota |
BUSH, STABILIZER, REAR
|
3 |
0.151
|
|
29.46$
|
Substitutions
| Make | Number | Name | Availability | Weight, kg | Processing, days | Price | |
|---|---|---|---|---|---|---|---|
| FEBEST |
TSBGSE30R
|
REAR STABILIZER BUSHING D17
|
19 |
0.115
|
2-3
|
2.04$
|
Compatibility
| Description | Model | Options | Prod Period | Diagram |
|---|---|---|---|---|
| ASE30,AVE3#,GSE3#,USE3# | ASE30-AEZLZ | ATM,MTM: AUTOMATIC TRANSMISSION; NO. Of Doors: 4-DOOR; Body: SEDAN; Grade: LUXURY TYPE; Gear Shift Type: ATM, 8-SPEED FLOOR SHIFT; Engine: (8ARFTS) 2000CC 16-VALVE DOHC EFI TURBO | 08.2015 - 09.2020 | View |
| Description | Model | Options | Prod Period | Diagram |
|---|---|---|---|---|
| ASE30,AVE30,GSE3# | GSE31R-AEZLHQ | ATM,MTM: AUTOMATIC TRANSMISSION; NO. Of Doors: 4-DOOR; Driver's Position: RIGHT-HAND DRIVE VEHICLES; Body: SEDAN; Grade: LUXURY TYPE; Gear Shift Type: ATM, 8-SPEED FLOOR SHIFT; Engine: (2GRF) 3500CC 24-VALVE DOHC; Destination: AUSTRALIA | 04.2013 - 09.2020 | View |
Rear anti-roll bar bushing for Toyota, OE 48818-53080
This rear stabilizer bushing keeps the sway bar firmly located on the chassis, so your Toyota corners flat, tracks straight, and stays quiet. Fresh mounts bring back crisp steering feel, reduce body roll, and stop the clunking that shows up over bumps.
Why you need it
The bushing centers the bar and transfers cornering force from one wheel to the other. It filters vibration, protects links and brackets, and helps ABS/ESC work smoothly. Replacing worn mounts improves safety, tire life, and ride comfort.
How it works
The inner bore hugs the stabilizer bar; the outer surface sits in a clamp bracket. As the bar twists, the elastomer shears slightly, allowing controlled movement while isolating noise. Correct inner diameter and groove design prevent slip and squeak.
If it fails ⚠️
Symptoms include knocking on bumps, squeaks in wet weather, steering delay, wandering on highways, extra lean in fast turns, and uneven tire wear. Severe play can let the bar shift, stressing links and even cracking brackets.
Build and fitment ✅
High-grade rubber with anti-ozone additives, molded to the exact bar size specified by OE 48818-53080. Direct fit to factory rear brackets on compatible Toyota platforms.
Replacement tips
Support the vehicle safely, mark bar position, loosen brackets evenly, clean bar with fine emery, install bushing with correct slit orientation, torque to spec with suspension loaded, road-test, then recheck torque after 100–200 km.