38454N3160 Nissan SPACER-DIFFERENTIAL SIDE, Price: 32.29$, Weight: 0.12kg

Precision Differential Side Spacer for Smooth, Quiet Final Drive ⚙️

This precision-ground side spacer (also called a side gear shim) stabilizes the differential carrier inside the axle housing. It sets bearing preload and ring‑and‑pinion backlash so the gears mesh correctly, keeping acceleration smooth, cornering predictable, and road noise low. Built from hardened steel, it holds exact thickness under heat and load, protecting costly gears and bearings.

Why you need it

Inside the rear differential, clearances must be exact. The spacer centers the carrier laterally and loads the side bearings. With proper preload and backlash, gear teeth share load evenly, reducing wear and preventing whine.

How it works

Matched spacers sit against the carrier bearings. By selecting the correct thickness, a technician positions the ring gear relative to the pinion. This sets the contact pattern, controls heat, and keeps oil film stable at all speeds.

If the spacer is worn or damaged ❗

• Gear whine or humming that changes with speed
• Clunk on throttle tip-in, especially from a stop
• Metal flakes in gear oil, bearing pitting, overheating
• Rapid ring and pinion wear, possible differential failure

Tech notes and install tips ️

• Measure backlash and bearing preload to service manual specs
• Use gear marking compound to verify tooth contact pattern
• Torque cap bolts evenly; recheck after rotating the carrier
• Refill with quality GL-5 gear oil; test-drive and re-inspect

Compatibility

• Q45
• J30