222262G030 Hyundai / KIA TAPPET, Price: 10.80$, Weight: 0.03kg

Valve tappet (bucket lifter) for precise, quiet valvetrain control

This precision-machined bucket lifter keeps valve lash correct in Hyundai/Kia DOHC engines. Built from hardened, low-friction steel, it rides on a stable oil film to transfer cam motion to the valve stem with minimal wear. The result is accurate timing, clean combustion, and quiet operation ?.

Why you need it ?

Over time, buckets wear or dish, lash increases, and noise rises. Replacing worn lifters restores smooth idle, power, fuel economy, and emissions control. It’s a smart service whenever a head is off, cams are changed, or lash is out of spec.

How it works ⚙️

The cam lobe pushes the bucket, which presses the valve open. Correct bucket height sets lash so the valve fully seals on the seat between cycles. Engine oil lubricates and cools the contact surface, preventing scuffing and lobe damage.

Failure symptoms and risks ?

Ticking on cold start, misfire, rough idle, and reduced power are common signs. Severe wear can round a cam, burn valves, and shed metal into oil. Ignoring it risks costly head work—replace early, ideally in matched sets.

Tech notes ✅

Always measure lash and select correct bucket sizes. Use approved oil viscosity, clean cam journals, and pre-lube before first start. Torque caps in sequence and recheck lash after a full heat cycle.

Compatibility

• Sonata
• Sonata Hybrid
• I45
• Santa Fe
• Tucson
• ix35
• i30 N
• Kona N
• Kauai N
• Veloster N
• H-1 / Grand Starex
• Genesis Coupe
• Genesis G70
• G80
• Grandeur / Azera
• Grandeur Hybrid