0494726040 Toyota FITTING KIT, DISC BRAKE, FRONT, Price: 41.55$, Weight: 0.044kg

Front Disc Brake Hardware Kit for Toyota Vehicles ️

This hardware set renews the small but critical parts that guide and secure your front brake pads. Fresh clips, springs, and boots keep the pads aligned, quiet, and free to move. Built to OE spec for Toyota front axle setups, it helps restore smooth braking, even pad wear, and confident stops .

Why this part is needed ✅

Over time, factory clips lose tension, rust builds up, and rubber boots crack. That causes pad drag, rattle, and tapered wear. Replacing the fitting parts when installing new pads ensures proper clearance, silent operation, and longer rotor and pad life.

How it works ⚙️

Stainless abutment clips lock into the caliper bracket and create a low-friction surface for pad ears. Anti-rattle springs apply light pressure to stop chatter. Guide pin boots seal out water and dust so pins slide smoothly. With correct lubrication, the caliper centers the pads and releases cleanly.

What happens if it’s worn or broken ⚠️

Squeal on light braking, steering wheel vibration, hot smells, pulling to one side, and glazed pads. You may see uneven pad thickness, blue rotor spots, or reduced stopping power. Left unchecked, rotors can warp and fuel use can rise from drag.

Fitment and install tips

Clean brackets to bare metal, fit new clips fully, apply a thin film of silicone brake grease on contact points (not friction surfaces), torque guide pins to spec, and bed-in pads. Replace in pairs on the front axle for balanced braking.