0441260450 Toyota GASKET KIT, REAR DIFFERENTIAL CARRIER, Price: 26.16$, Weight: 0.696kg


Make Number Name Availability Weight, kg Ship in, Days Price

Toyota

0441260450

GASKET KIT, REAR DIFFERENTIAL CARRIER

0

0.696

7-10

26.16$

Not Available

Originals

Make Number Name Availability Weight, kg Processing, days Price  
Toyota
0441260450 
GASKET KIT, REAR DIFFERENTIAL CARRIER
0
0.8
-
29.62$
Not Available

Substitutions

Make Number Name Availability Weight, kg Processing, days Price  
Toyota
0441260390 
GASKET KIT, REAR DIFFERENTIAL CARRIER
0
0.113
-
31.40$
Not Available

Compatibility

DescriptionModelOptionsProd PeriodDiagram
GRJ200,URJ20#,UZJ200,VDJ200VDJ200R-KDMRZATM,MTM: MANUAL TRANSMISSION; Seating Capacity: 9-SEATER; Driver's Position: RIGHT-HAND DRIVE VEHICLES; Grade: STANDARD TYPE; Gear Shift Type: MTM, 5-SPEED FLOOR SHIFT; Engine: (1VDFTV) 4500CC DIESEL TURBO; Destination: GENERAL COUNTRIES09.2011 - 01.2012 View

Rear Differential Carrier Seal Kit 🛞

Keep your axle quiet, cool, and leak‑free with this rear differential carrier gasket set. Built for hard 4x4 duty, it seals the carrier to the axle housing so high‑pressure gear oil stays inside and splash‑lubricates gears and bearings. Perfect after off‑road water crossings or during a diff rebuild. OEM‑grade materials deliver long service life and stable performance. ⚙️

Why you need it

Heat cycles, age, and vibration crush old gaskets. Once flattened, gear oil seeps, inviting noise, wear, and burning smells. Fresh seals restore proper lubrication film thickness, protect the ring and pinion, and keep your driveway clean. 💧

How it works

Precision‑cut fiber and elastomer layers compress under bolt torque, filling micro imperfections between carrier and housing. Sealing washers stop bolt weep. With a tight joint, oil forms a steady bath that cools and lubricates the ring gear, side gears, and bearings for smooth, quiet operation. 🔩

What if it fails

Low oil causes bearing howl, gear whine on cruise, overheating, and metal glitter in the drain. Prolonged loss can chip teeth or even lock the diff. Watch for a wet housing, drops on the driveway, and sulfur odor after drives. 🛠️

Install tips

Clean mating faces, remove old sealant, check flatness, then torque fasteners in a criss‑cross pattern to spec. Use minimal sealant if required, let it cure, refill with correct GL‑5 oil, road‑test, and recheck for seepage. 🔧

Compatibility

  • Land Cruiser