0441226270 Toyota GASKET KIT, REAR DIFFERENTIAL CARRIER, Price: 31.31$, Weight: 0.164kg
| Make | Number | Name | Availability | Weight, kg | Ship in, Days | Price |
|---|---|---|---|---|---|---|
Toyota |
0441226270 |
GASKET KIT, REAR DIFFERENTIAL CARRIER |
0 |
0.164 |
7-10 |
31.31$ |
| Not Available | ||||||
Originals
| Make | Number | Name | Availability | Weight, kg | Processing, days | Price | |
|---|---|---|---|---|---|---|---|
| Toyota |
GASKET KIT, REAR DIFFERENTIAL CARRIER
|
0 |
0.189
|
-
|
32.11$
|
Not Available |
Substitutions
| Make | Number | Name | Availability | Weight, kg | Processing, days | Price | |
|---|---|---|---|---|---|---|---|
| Toyota |
0441226260
|
GASKET KIT, REAR DIFFERENTIAL CARRIER
|
0 |
0.177
|
-
|
35.21$
|
Not Available |
Compatibility
| Description | Model | Options | Prod Period | Diagram |
|---|---|---|---|---|
| GDH2##,KDH2##,LH2##,TRH2## | TRH223R-LETDKQ | Seating Capacity: 14-SEATER; NO. Of Doors: 4-DOOR; Roof: HIGH-ROOF; Driver's Position: RIGHT-HAND DRIVE VEHICLES; Body: COMMUTER; Grade: STANDARD TYPE; Fuel Induction: HIGH EFFICIENCY TWIN CAM; Gear Shift Type: ATM, 6-SPEED FLOOR SHIFT; Engine: (2TRFE) 2700CC 16-VALVE DOHC EFI; Destination: AUSTRALIA | 01.2015 - 02.2019 | View |
| Description | Model | Options | Prod Period | Diagram |
|---|---|---|---|---|
| KDH2##,TRH2## | TRH229W-LDPNK5 | Drive Train: 4 WHEEL DRIVE; Seating Capacity: 10-SEATER; NO. Of Doors: 4-DOOR; Building Condition: TECS SPECIAL PURPOSE VEHICLE; Roof: HIGH-ROOF; Body: WAGON; Grade: GRAND CABIN; Gear Shift Type: ATM, 4-SPEED FLOOR SHIFT; Engine: (2TRFE) 2700CC 16-VALVE DOHC EFI | 01.2005 - 05.2012 | View |
Rear Differential Carrier Gasket Set for Toyota Vans
Why you need it
This kit renews the seal between the third member and axle housing, stopping gear oil leaks and keeping the ring & pinion, bearings, and side gears safe. A fresh seal keeps dirt and water out, stabilizes lubrication, and helps your work van stay quiet and efficient on long routes .
How it works
Precision-cut gasket material and seals compress under proper torque to fill micro gaps between the carrier and housing. The compound resists heat, pressure, and 75W-90 gear oil. By holding oil inside and contaminants outside, it maintains correct backlash and bearing preload, preventing foaming and heat build-up.
What happens if it fails
Expect wet seams, drips on the floor, whining on cruise, and a burnt oil smell. Low oil leads to hot spots, bearing scuffing, and pitted teeth. Ignore it, and you risk a noisy differential, metal glitter in the oil, and a costly rebuild .
Install tips from the bay
Clean both flanges to bare metal, no gouges. Dry-fit first; apply a thin OE-specified sealant bead at corners only. Torque bolts in a cross pattern, then recheck after a heat cycle. Refill to spec and road-test; verify for dry seams.
Benefits
- OEM-grade sealing material
- Exact fit, no trimming
- Long service life under heavy load
- Protects gears and bearings
Compatibility
- Hiace
- Hiace/Regiusace