• Products
  • 0437104031 Toyota SPIDER KIT,*(R/a-E)***

0437104031 Toyota SPIDER KIT,*(R/a-E)***, Price: 48.50$, Weight: 0.613kg

    • Make Number Name Availability Weight, kg Ship in, Days Price

    Toyota

    0437104031

    SPIDER KIT,*(R/a-E)***

    		 0

    0.613

    7-10

    48.50$
    Not Available

    Originals

    Make Number Name Availability Weight, kg Processing, days Price  
    Toyota
    0437104031 
    SPIDER KIT,*(R/a-E)***
    		72
    0.705
    2-3
    50.31$
     

    Substitutions

    Make Number Name Availability Weight, kg Processing, days Price  
    Toyota
    0437104030 
    SPIDER KIT, REAR PROPELLER SHAFT UNIVERSAL JOINT
    		0
    0.73
    -
    44.06$
    		 Not Available

    Compatibility

    DescriptionModelOptionsProd PeriodDiagram
    GRN2##,3##,TRN2##TRN265L-CRTSKACab: LARGE CAB; Grade: SR-5 TYPE,GLX TYPE; Gear Shift Type: ATM, 6-SPEED FLOOR SHIFT; Engine: (2TRFE) 2700CC 16-VALVE DOHC EFI; Destination: UNITED STATES OF AMERICA08.2015 - ... View

    Driveshaft Spider Kit (U-joint) — OEM-Grade Replacement

    Why you need it

    The rear propeller shaft depends on a spider assembly to deliver engine torque to the axle while the suspension moves. Wear in the cross and needle bearings creates play, noise, and vibration. Replacing this unit restores tight yoke fit, smooth rotation, and shields the transmission and differential from shock loads. 🔧

    How it works

    A hardened cross with four trunnions rides in precision needle bearings inside the yokes. Seals and grease channels keep lubrication around the rollers, allowing angular movement while maintaining concentric drive. The result is quiet, balanced power delivery even at steep working angles. ⚙️

    When it fails

    Typical signs include chirps at low speed, clunks on gear change, and shudder between 40–70 mph. Rust dust by the caps, dry seals, or looseness at the shaft mean the joint is done. Ignoring it can lead to seized bearings, caps walking out, damaged yokes, a bent shaft, and even loss of drive. ⚠️

    Tech highlights

    • Hardened cross and matched needle bearings
    • Correct cap diameter and snap-ring groove depth
    • Factory fitment; no shims or machining
    • Greaseable design where applicable

    Install tips

    • Mark driveshaft phasing before disassembly
    • Press caps evenly; never hammer on trunnions
    • Confirm clip seating and endplay
    • Grease until clean purge appears

    Compatibility

    • Tacoma