Search result for: 62410VB012
FINISHER-HEAD LAMP,RH
Part number: 62410VB012
Availability: 0
Weight, kg: 0.253
Make: Nissan
Made in: Japan
Substitutions
FINISHER-HEAD LAMP,RH
Part number: 62410VB013
Availability: 3
Weight, kg: 0.253
Order now:
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB001
Availability: 1
Weight, kg: 0.302
Processing: 2-3 days
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB013
Availability: 3
Weight, kg: 0.253
Processing: 2-3 days
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB003
Availability: 0
Weight, kg: 0.23
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VC209
Availability: 0
Weight, kg: 0.253
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB009
Availability: 0
Weight, kg: 0.109
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB011
Availability: 0
Weight, kg: 0.23
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB002
Availability: 0
Weight, kg: 0.253
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB004
Availability: 0
Weight, kg: 0.26
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VC204
Availability: 0
Weight, kg: 0.161
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB005
Availability: 0
Weight, kg: 0.23
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB006
Availability: 0
Weight, kg: 0.253
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB008
Availability: 0
Weight, kg: 0.23
Make: Nissan
Made in: Japan
FINISHER-HEAD LAMP,RH
Part number: 62410VB007
Availability: 0
Weight, kg: 0.253
Make: Nissan
Made in: Japan
Right Headlamp Finisher Trim ✨
This exterior finishing trim fits on the right side of the front lighting area and gives the headlight corner a clean, factory look. It is needed to close small gaps between the lamp and body panel, helping guide airflow and reducing dirt buildup around the headlamp edge.
How It Works ?
The trim locks into place using molded tabs/clips and aligns with the headlamp and surrounding fascia. Once seated correctly, it stabilizes the lamp border area, prevents minor vibration, and protects the seam from water splash, road salt, and grit.
If It’s Broken or Missing ⚠️
A cracked or loose finisher can rattle, sit uneven, and let debris pack into the headlamp seam. Over time this may cause scratched paint, faster corrosion on exposed edges, and poor panel alignment. In some cases it can also stress nearby clips and mounting points, leading to bigger fitment issues.
Why Replace It ✅
Replacing this piece restores tight fitment, improves appearance, and helps keep the headlamp area sealed and tidy—just like the original assembly.
Compatible Models
- Challenger