• Produkte
  • 1237167020 Toyota INSULATOR, ENGINE MOUNTING, REAR NO.1
Hersteller Toyota

1237167020 INSULATOR, ENGINE MOUNTING, REAR NO.1

Bilder

3 Bilder

Ersetzungen

Hersteller Nummer Name Verfügbarkeit Verarbeitung, Tage Preis  
RBI
T11VZJ95 
ENGINE MOUNTING KZJ95/RZJ95/VZJ95
100
4-5
32.44$
 
FEBEST
TM109 
REAR ENGINE MOUNTING 1KDFTV/1KZTE
21
2-3
30.47$
 

Kompatibilität

Toyota 1237167020

BeschreibungModellOptionenProduktionszeitraumDiagramm
KDN185,KZN185,RZN18#,VZN18#KZN185W-GAPXTATM,MTM: AUTOMATIC TRANSMISSION; Body: WIDE BODY; Grade: SSR-X TYPE; Fuel Induction: TURBO DIESEL WITH EFI; Gear Shift Type: ATM, 4-SPEED FLOOR SHIFT; Engine: (1KZTE) 3000CC DIESEL TURBO11.1995 - 07.1998 View
BeschreibungModellOptionenProduktionszeitraumDiagramm
KZJ9#,LJ9#,RZJ9#,VZJ9#KZJ95R-GKPNTQATM,MTM: AUTOMATIC TRANSMISSION; NO. Of Doors: 5-DOOR; Driver's Position: RIGHT-HAND DRIVE VEHICLES; Grade: GX TYPE; Fuel Induction: TURBO DIESEL EFI; Engine: (1KZTE) 3000CC DIESEL TURBO; Destination: AUSTRALIA09.1999 - 09.2002 View
BeschreibungModellOptionenProduktionszeitraumDiagramm
KDJ9#,KZJ9#,RZJ9#,VZJ9#KZJ95W-GKPSTATM,MTM: AUTOMATIC TRANSMISSION; Seating Capacity: 8-SEATER; NO. Of Doors: 5-DOOR; Grade: TX TYPE; Engine: (1KZTE) 3000CC DIESEL TURBO04.1996 - 08.2000 View

Informationen

Rear Engine Mount Insulator for Toyota SUVs

This rear mount insulator supports the powertrain and filters vibration so your cabin stays quiet and the drivetrain stays aligned. Built with heavy‑duty rubber bonded to steel, it’s designed for tough daily use and off‑road loads. Perfect fit and OE-style geometry keep torque reactions under control and protect nearby parts.

Why you need it

It reduces noise, vibration, and harshness (NVH), stabilizes engine angle, and prevents stress on exhaust joints, hoses, and prop‑shaft. A healthy rear mount keeps shifts smooth and minimizes drivetrain shudder.

How it works

The rubber core acts as a damper and isolator. During start‑up, braking, and gear changes, it cushions movement while the steel frame anchors to the subframe. Working with the side and front mounts, it holds the correct powertrain height and alignment.

What happens if it’s damaged ⚠️

Expect harsh vibration at idle, clunks on acceleration, sagging engine angle, faster wear of other mounts, and possible exhaust flex cracks or prop‑shaft misalignment. Visible rubber cracks, oil soaking, or separated bonding mean it’s time to replace.

Tech tip ✅

Support the engine, install loosely, then torque fasteners at normal ride height to avoid pre‑load. Inspect heat shields and adjacent mounts while you’re there.

Compatibility

  • Hilux Surf
  • Land Cruiser 90
  • Land Cruiser Prado