Rear Right Tail Light Assembly for Toyota SUVs

Why this part is needed

This complete rear lamp restores factory lighting, visibility, and style. It keeps your brake, tail, turn, and reverse signals bright and legal. A fresh, sealed unit stops water ingress, prevents electrical shorts, and keeps you safe at night and in bad weather.

How it works

The assembly houses reflectors, lens, and bulb sockets (or LED board, depending on trim). When you press the brake, the bright filament/LED illuminates; the indicator flashes amber/red; the reverse circuit turns white. Internal optics focus light so other drivers see clear signals. A gasket seals the housing to the body, and a plug connects to the factory harness.

What happens if it’s broken ⚠️

Cracked lens lets moisture in, causing fogging, blown bulbs, or fuse failure. Dull or inoperative lights increase rear‑end risk and can fail inspection or trigger warnings. Broken mounts lead to vibration, poor beam aim, and paint damage.

Install & pro tips

Bolt-on, plug-and-play. Transfer bulb holders if required, clean the seating area, check the foam seal, tighten evenly, then test brake, tail, turn, and reverse. Use dielectric grease on connectors for longevity.

Build & durability

UV-stabilized polycarbonate lens, rigid ABS housing, OEM-style alignment pins, and weatherproof gasket ensure long service, tight fit, and factory look.

Compatibility

• 4Runner
• Hilux Surf
• Land Cruiser Prado