4807542050 Toyota BRACKET, FRONT LOWER ARM, RH, Price: 24.67$, Weight: 0.545kg

    • صنع الرقم اسم التوفر الوزن، كغ Ship in, Days السعر

    Toyota

    4807542050

    BRACKET, FRONT LOWER ARM, RH

    		 10

    0.545

    2-3

    24.67$
     

    Originals

    صنع الرقم اسم التوفر الوزن، كغ معالجة، أيام السعر  
    Toyota
    4807542050 
    BRACKET, FRONT LOWER ARM, RH
    		8
    0.545
     Dispatch 24h
    29.60$
     

    بدائل

    صنع الرقم اسم التوفر الوزن، كغ معالجة، أيام السعر  
    FEBEST
    TAB050 
    REAR BUSHING WITHOUT BRACKET, FRONT CONTROL ARM
    		25
    0.188
    2-3
    5.17$
     
    RBI
    T24RV1WB 
    LOW.BUSH
    		70
    0.18
    4-5
    4.69$
     
    Toyota
    4806907030 
    ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 LH
    		0
    3.34
    -
    203.92$
    		 غير متوفر
    Toyota
    4807542010 
    BRACKET, FRONT LOWER ARM, RH
    		0
    0.54
    -
    20.36$
    		 غير متوفر

    التوافق

    الوصفالموديلالخياراتفترة الإنتاجمخطط
    SXA1#SXA11R-AWPGKWATM,MTM: AUTOMATIC TRANSMISSION; NO. Of Doors: 5-DOOR; Driver's Position: RIGHT-HAND DRIVE VEHICLES; Body: HARDTOP; Engine: (3SFE) 2000CC 16-VALVE DOHC EFI; Destination: EUROPE04.1995 - 05.2000 View

    Front lower arm bracket RH — keep your suspension geometry locked in

    Why your vehicle needs it

    This right‑hand mounting bracket secures the front lower control arm to the subframe, holding caster, camber, and toe exactly where the factory intended. It carries heavy braking and cornering loads, preventing the arm from shifting. Impacts, curb hits, or corrosion can bend or crack the bracket, leading to wandering steering and accelerated tire wear. Replacing it restores straight‑line stability, precise turn‑in, and safe braking.

    How it works

    A precision‑formed, high‑tensile steel carrier triangulates the control arm pivot with the chassis. Combined with OE bushings and correct bolt torque, it maintains clamp load so alignment stays true while filtering vibration. Protective coatings resist rust, and the rigid geometry keeps wheel setback in check under hard stops. ⚙️️

    What happens if it’s damaged

    Expect clunks over bumps, steering pull, crooked wheel, uneven inner/outer tire wear, and vague highway tracking. In severe cases the arm can shift under braking, upsetting ABS/ESC readings and lengthening stopping distances. A cracked or bent mount is a safety risk—do not weld or “straighten”; replace immediately. ⚠️

    Pro install tips from the bay

    Use OE‑grade hardware, replace any stretch bolts, and torque at ride height. Check the control arm bushings/ball joint, inspect subframe threads, and align the wheels after installation. Never heat the bracket; verify subframe squareness if impact damage is suspected.

    Compatibility

    • Rav4