OE-Grade Fuel Strainer Connector for Pump Module ⛽

OE-grade connector links the in‑tank pump to the fuel strainer. It locks the pickup, seals the joint, and feeds clean fuel to the rails. Fuel‑proof body and a tight O‑ring handle heat, vibration, and ethanol blends. Designed for select Nissan/Infiniti pump modules for reliable fuel delivery.

Why it’s needed ️

It stops air leaks and dirt bypass at the pump inlet. Without a solid seal, pressure drops, priming slows, and injectors can see grit. With the correct connector, starts are crisp, idle is steady, and fuel pressure remains stable under load.

How it works

Snap‑fit body latches to the pump foot and the strainer collar. The O‑ring centers and seals the joint so the pump draws only through the mesh sock. During cornering or braking, the fixed pickup stays submerged to prevent cavitation and starvation.

What happens if it’s damaged ⚠️

Expect hard starts, stumble on turns, lean codes, whining pump, or stalling near empty. Cracks or a swollen seal let air in and debris through, scarring injectors and overheating the pump—often leading to premature pump failure.

Install tips

Replace whenever the pump or sock is serviced. Lightly oil the O‑ring, align tabs, press until a clean click—do not force. Keep the tank area lint‑free to protect the fuel system.

Compatibility

• Qx80/Qx56
• M35/45
• Qx70/Fx
• Qx60/Jx
• Qx56
• Qx60 Hybrid
• M45