5238060012 Toyota SUPPORT ASSY, FRONT DIFFERENTIAL, Price: 110.29$, Weight: 2kg
| Make | Number | Name | Availability | Weight, kg | Ship in, Days | Price |
|---|---|---|---|---|---|---|
Toyota |
5238060012 |
SUPPORT ASSY, FRONT DIFFERENTIAL |
0 |
2 |
7-10 |
110.29$ |
| Not Available | ||||||
Originals
Compatibility
| Description | Model | Options | Prod Period | Diagram |
|---|---|---|---|---|
| GRN21#,UZN21# | UZN215L-GKAZKA | ATM,MTM: AUTOMATIC TRANSMISSION; Grade: LIMITED TYPE; Gear Shift Type: ATM, 5-SPEED FLOOR SHIFT; Engine: (2UZFE) 4700CC 32-VALVE DOHC EFI | 08.2002 - 08.2009 | View |
| Description | Model | Options | Prod Period | Diagram |
|---|---|---|---|---|
| GSJ15 | GSJ15L-GKFSKY | ATM,MTM: MANUAL TRANSMISSION; Driver's Position: LEFT-HAND DRIVE VEHICLES; Engine: (1GRFE) 4000CC 24-VALVE DOHC EFI; Destination: GENERAL COUNTRIES | 07.2007 - 12.2017 | View |
| Description | Model | Options | Prod Period | Diagram |
|---|---|---|---|---|
| GRN215,KDN215,RZN21#,TRN21#,VZN21# | VZN215W-GKPXK | ATM,MTM: AUTOMATIC TRANSMISSION; NO. Of Doors: 5-DOOR; Grade: SSR-X TYPE; Fuel Induction: ELECTRIC FUEL INJECTION SYSTEM; Gear Shift Type: ATM, 4-SPEED FLOOR SHIFT; Engine: (5VZFE) 3400CC EFI | 11.2002 - 08.2005 | View |
| Description | Model | Options | Prod Period | Diagram |
|---|---|---|---|---|
| GRJ12#,KDJ120,KZJ120,LJ12#,RZJ12#,TRJ12# | TRJ125L-GJPEKV | ATM,MTM: AUTOMATIC TRANSMISSION; NO. Of Doors: 3-DOOR; Driver's Position: LEFT-HAND DRIVE VEHICLES; Grade: GX TYPE; Gear Shift Type: ATM, 4-SPEED FLOOR SHIFT; Engine: (2TRFE) 2700CC 16-VALVE DOHC EFI; Destination: GULF CORPORATION COUNCIL | 08.2004 - 08.2009 | View |
Front Differential Support Bracket for Toyota 4x4 SUVs 🛠️
This heavy-duty front diff support bracket keeps your 4WD drivetrain aligned, quiet, and strong. Built to OEM geometry, it holds the differential in the correct position under load, reduces vibration, and protects CV axles and driveshafts during daily driving and off-road use. Perfect as a direct replacement for worn mounts on Toyota body-on-frame platforms 🚙.
Why your vehicle needs it
The bracket secures the differential carrier to the subframe/crossmember. It maintains pinion angle, absorbs torque, and isolates noise through rubber bushings. Without it, the front axle system cannot run smoothly or reliably.
How it works
A rigid steel cradle and bonded bushings clamp the diff housing using factory bolts. Under acceleration or during 4WD engagement, the mount resists twist, keeps the ring-and-pinion aligned, and prevents shock loads from reaching the chassis. This keeps NVH low and tire wear even.
What happens if it fails
Symptoms include clunking on takeoff, front-end vibration, shudder in 4WD, torn bushings, diff sag, leaking pinion seal, and fast CV joint wear. Prolonged use can crack the housing or damage the driveshaft and axle splines.
Install notes
Direct bolt-on with factory hardware. Support the diff, replace the bracket and bushings, then torque all fasteners to OEM spec with the vehicle at ride height. A quick alignment check is recommended after installation.
Compatibility
- 4Runner
- FJ Cruiser
- Hilux Surf
- Land Cruiser Prado